Energy efficiency in older houses

by | Home Comfort & Energy Efficiency, REthink Nillumbik Project

Too long, don’t want to read? Here are the key takeaways.

Older homes often have natural energy efficiency advantages built in. Thick brick walls retain and release heat gradually, high ceilings keep hot air away from occupants, wide verandahs provide shade, and thoughtful window placement encourages cross-ventilation: all features that reduce the need for mechanical heating and cooling.

Older homes are smaller. A typical 1930s home requires far less energy to heat and cool than a modern large open-plan house, regardless of how efficient its systems are. Separate rooms and hallways also allow zoned heating and cooling, so you only condition the spaces you’re actually using.

Many modern homes are designed to be corrected by technology rather than working with their climate. Poor orientation, lightweight materials, and open-plan layouts mean constant energy use just to maintain a comfortable temperature.

Older homes do have real drawbacks. Single-glazed windows, little or no insulation, draughts, and outdated heating systems can significantly undermine their natural advantages and drive up energy costs.

The sweet spot is an older home retrofitted with modern improvements. Adding insulation, double-glazed windows, draught sealing, and efficient electric appliances combines the passive design strengths of older construction with the best of modern technology; often producing better energy outcomes than a new build.

 

Full article

It may seem counterintuitive, but older homes can often be easier to make more energy efficient than new homes. This is because old homes were often designed to work with their climate, while many modern homes are designed to be corrected by technology. For newer builds, constant heating and cooling to compensate for ill-considered orientation, building materials and design features requires ongoing energy to run.

Here’s how your old house may have good bones for energy improvements.

Thermal mass

Many older homes are built with thick brick, stone, or double-brick walls. These materials absorb heat during the day and release it slowly at night, moderating indoor temperatures without any mechanical assistance. Modern lightweight construction that uses timber frames with thin cladding has far less of this buffering capacity.

Passive design principles

Before we had air conditioning, builders had to design for climate. Older homes often feature high ceilings that keep hot air away from occupants, wide verandahs that shade walls and windows, cross-ventilation through thoughtful window placement, and an orientation that captures natural sunlight and prevailing breezes. Many modern homes, by comparison, are oriented to maximise street frontage or views rather than solar and wind performance.

Smaller footprint

Older homes are usually much smaller than modern ones. A 1930s home that’s typically 120m² in size (13 squares in old speak) simply requires less energy to heat and cool than a sprawling 370m² (40 square) modern house, regardless of how efficient the newer home’s systems might be.

Zoning

Older homes are often ‘zoned’ into separate rooms and differently used areas of the house. Individual rooms with doors allow you to heat or cool only the spaces actually in use, while hallways and rarely-used rooms act as natural thermal buffers. Modern open-plan houses, while appealing, mean entire living areas must be heated or cooled as one large zone, using more energy to maintain a comfortable temperature.

The caveats

It’s important to be balanced here. As well as many good features, older homes can have significant energy-related downsides, including:

  • single-glazed windows with poor thermal performance
  • little to no insulation
  • draughts and gaps from ageing materials
  • inefficient appliances and heating systems like open fireplaces.

The sweet spot

Surprisingly, the most energy-efficient outcome is often an older home that has good passive design and is retrofitted with modern improvements. This would include insulating the walls, floors and roof space, double glazing windows and doors, draught sealing gaps and vents, replacing inefficient heating with reverse cycle, and switching to an efficient heat-pump hot water system.

An older, smaller house with retrofitted modifications combines the best of both worlds: the thermal mass, zoning, and passive design of the old with the technology of the new.

Categories

Recent Posts

How long do EV batteries last?

How long do EV batteries last?

Too long, don't want to read? Here are the key takeaways. ​​ EV batteries last much longer than warranties suggest. While most EV battery warranties are for 8 years/160,000km, real-world data indicates they last 15–20 years with minimal degradation, outlasting the...

Looking after your rooftop solar

Looking after your rooftop solar

Too long, don't want to read? Here are the key takeaways. ​​ Solar panels are low maintenance, but not no maintenance. Modern panels are built tough, but a few simple habits will keep them running efficiently and extend their lifespan. Keep panels clean and unshaded....

What’s ‘electrification’ and why should we embrace it?

What’s ‘electrification’ and why should we embrace it?

Too long, don't want to read? Here are the key takeaways. ​​ Electrification means replacing gas and fossil fuel appliances with electric alternatives. This includes heating and cooling systems, hot water units, cooktops, and potentially solar panels, batteries, and...

Energy use in retirement

Energy use in retirement

Too long, don't want to read? Here are the key takeaways. ​​ Retirement often means higher energy bills, not lower. Spending more time at home means heating, cooling, lighting, and appliances run longer throughout the day. Comfort and health make energy use more...